It is a very common problem that products produced by Cold Roll Forming Machines have burrs ,these burrs cannot meet market requirements, such as burrs
Rafted Mills are more suitable for cold roll forming machine
The growth of rafted mills was a significant breakthrough in minimizing rollers transform time from 8 hr to 45 min. As a Cold Roll Forming Equipment Supplier, we have various sorts of RAFTED MILLS for different needs. Considering the plant limited, budget, special line, and so on. The mill has a common bed on which situate the drive as well as the interchangeable place plates. The plates are holding 4 to 8 or even more stands. The training capacity (crane) at the customer’s plant generally restrict the variety of depend on a plate.
Both the operator-side as well as the drive-side stands are typical operator-side-type stands. While full with shafts and also tooling, the drive-side stands normally have bigger bearing blocks to suit pairs of cone bearings. Which strictly hold the shafts ready during the procedure. And when to get rid of the operator-side represent occasional roll adjustment.
The driven approach, we have 2 kinds, one is gear box transmission as well as chain & equipment transmission, To permit fast plate (profile) modification, the drive should have quick disconnect/connect function. One more is chain transmission, each mill will certainly put together chains to conserve time. Transmission modification time will be a bit lengthy. To additionally reduce the transition time, The drive system only drive the bottom shafts strongly attached to the bed. The gears located at the drive-side end of the mill shafts to drive all or several of the top shafts.
To give the quickest feasible device modification time, Cold Roll Forming Maker Vendor can make use of hydraulic pushers and also clamps. No demand totally machined the top surface of the mill bed. And also it is sufficient to device only the protruding surface areas where home plates (boatings) remainder.
The 4 lifting lugs connected to home plates should offer a reasonable great equilibrium, as well as the training add-ons (bars or chains) must not rub against the tooling, shafts, or stands.
To decrease transition time, It’s much better to put together all the additional components such as the entrance guides, side-roll stands, as well as straighteners in each collection of plates. Therefore conserving of flooring area can be achieved by keeping home plates of a profile on top of each other Tubes or various other components sustaining the top plate(s) must be incorporated in the plate design.
As a Cold Roll Forming Device Provider, we develop and maker complete series of chilly roll creating equipments based on demands, we have a professional group to create the rafted mills. The Rafted Mills is commonly used in Sandwich Panel Production Line-Cold Roll Forming Device Components, because this line constantly have 2 or even more profiles, some client also pick double -high mill.
Contact Us . If you have any question, please dont hesitate to contact us . We can send you more excellent case pictures and videos . We also will definitely give you best answer.
Often hear some buyers complain their machine orders can not run & operate smoothly after the equipment reach their workshop.And also the suppliers can not
During operating Cold Roll Forming Machine, special attention must be paid to maintenance.So we ensure the stable operation of the machine, which will not affect