
How to deal with the burrs which Cold Roll Forming Machine occus during production
It is a very common problem that products produced by Cold Roll Forming Machines have burrs ,these burrs cannot meet market requirements, such as burrs
Home » What is the Z Purlin Forming Machine?
Main power: 18.5KW
Forming station: 16 stations and 5 rolls are for leveling
Z Purlin Roll Forming Machine Diameter of shaft: ф80mm
Cutting system: hydraulic
Tolerance: 3m±1.5mm
Speed: 12-15m/min (Not including cutting)
Material of the rollers: GCr15, hard chromed 58–62degrees
Material of shaft: GCr15 steel, quenching HRC58○-60○
Material of blade and punching mould: Cr12, quenched 58-62
Z Purlin Roll Forming Machine Transducer: Panasonic made in Japan
Hydraulic main motor: 7.5kw
Cutting pressure: Max.20Mpa
Control system: PLC, Panasonic
Z Purlin Roll Forming Machine Rolled thickness: 1.5mm–3mm
Size of machine: approx 13.2m×1.4m×1.2m
Z Purlin Roll Forming Machine Way of drive: chain drive
Electrical requirements: 380V, 50Hz, 3Ph or according to the customer’s local standard
MODEL | H | B | B | C | T |
Z145 | 145 | 60 | 60 | 20 | 1.5-3.0 |
Z180 | 180 | 67 | 61 | 20 | 1.5-3.0 |
Z200 | 200 | 67 | 61 | 20 | 1.5-3.0 |
Z230 | 230 | 72 | 77 | 20 | 1.5-3.0 |
Z250 | 250 | 78 | 72 | 20 | 1.5-3.0 |
Z300 | 300 | 78 | 72 | 20 | 1.5-3.0 |
It is a very common problem that products produced by Cold Roll Forming Machines have burrs ,these burrs cannot meet market requirements, such as burrs
Often hear some buyers complain their machine orders can not run & operate smoothly after the equipment reach their workshop.And also the suppliers can not
During operating Cold Roll Forming Machine, special attention must be paid to maintenance.So we ensure the stable operation of the machine, which will not affect