
How to deal with the burrs which Cold Roll Forming Machine occus during production
It is a very common problem that products produced by Cold Roll Forming Machines have burrs ,these burrs cannot meet market requirements, such as burrs
Home » What is Trapezoid Roof Roll Forming Machine?
Trapezoid roof roll forming machine also known as roof &wall panel roll former machine, is used for producing wall panel and roof. It could make steel sheets into required shapes and length. Metal trapezoidal roof is widely applied in commercial metal buildings and housing. Trapezoid roof roll forming machine features good appearance, high coverage, high strength and high automation. At the meantime, it has lower cost and longer lifetime. With good performance in operation, it works with little noise and is easy to maintain.
The wall panel roller former is mainly composed of decoiler, roll former, cutting machine, PLC computer, hydraulic system and output table.
Suitable to process | colored steel plate, galvanized board |
Width of the plate | 1250mm |
Rollers | 18 groups |
Rolling material | Forging steel 45# |
Rolling galvanization thickness | 0.3-0.8mm |
Material of the cutting blade | Cr12mov |
Dimensions | Approx 9m×1.8m×1.5m |
Power | 5.5kw |
Thickness of the plate | 0.3-0.8mm |
productivity | 10m-15m/min |
Diameter of the roller | 76mm |
Weight | About 7T |
Voltage | 380V, 50Hz |
Processing precision | Within 1.00mm |
It is a very common problem that products produced by Cold Roll Forming Machines have burrs ,these burrs cannot meet market requirements, such as burrs
Often hear some buyers complain their machine orders can not run & operate smoothly after the equipment reach their workshop.And also the suppliers can not
During operating Cold Roll Forming Machine, special attention must be paid to maintenance.So we ensure the stable operation of the machine, which will not affect